Mark 3 is a flexible moisture analyzer system for labs and production facilities. Its optional modular add-ons provide the best solution for every measuring task.
Its high-resolution weighing system also makes the Mark 3 HP suitable for precisely analyzing the moisture and water content of very dry samples. This feature makes it a genuine alternative to Karl-Fisher titration.
With its resolution of 0.01%, the Mark 3 LTE has been optimized to achieve good reproducibility in routine measurements.
Fast Quick measuring times give you greater flexibility and let you adapt your production processes fast. Flexible Whether your samples are solid, liquid or pasty, the Mark 3 LTE can variably analyze moisture contents ranging from 1.00% to 99.90%. Neither does it matter if you intend to carry out 3 or 300 measurements a day. Easy Even inexperienced users can reliably operate the Mark 3 intuitively and easily. Thanks to effective password protection, access can be restricted to pure measuring functions. The press of a button starts the measurement.| Model | LMA110-SET-P | LMA100-SET-P |
|---|---|---|
| Capacity x Readability | 40 x 0.001 g | 100 x 0.0001 g |
| Reproducibility | 1 mg | 0.1 mg |
| Calibration | External | Internal or External |
| Display of results | 0.01% | |
| Reproducibility of the measurement | Starting at an initial sample weight of approx. 1 g: ± 0.2% Starting at an initial sample weight of approx. 5 g: ± 0.05% |
|
| Method of measurement | Loss on Drying | |
| Recommended moisture range | 1.00–99.90% | |
| Heat source | Four parallel infrared quartz cylinders | |
| Modular configuration | Optional up to 4 heater modules connectable | |
| Internal printer | Optional internal thermal printer, 40 character graphic | |
| Temperature range and adjustment | 30–210°C in one-degree increments | |
| Temperature steps | Programmable, one or two | |
| Standby temperature | Standby temperature selectable from 30–160°C | |
| Temperature display | Display of target temperature and actual temperature during the measurement and in standby mode | |
| Measured value display | Weight loss in mg % moisture % dry weight % volatiles % moisture/dry weight |
|
| Modes of operation | Standard Test or Concentration mode | |
| Endpoint determination | Timer mode, value falls below a defined weight loss per time unit (%/min), trend shutoff | |
| Program storage | 60 programs, fail-safe storable | |
| Data storage | Storage 999 results with statistics: average, SD, RSD, high and low | |
| Temperature adjustment | Optional fixture for internal electronic two-point-adjustment | |
| Adjustment of the weighing system | External manual | |
| Ideal initial weight | Audio and visual display for programmable target sample weight addition | |
| Initial sample weight lock | Lockable initial sample weight for optimal repeatability | |
| Pass-Fail-function | Programmable target value including limiting values, pass-fail-information after the measurement | |
| Sample-ID | Numeric, numeric incrementing, alphanumeric or turned off | |
| User management | 20 users password protected storable | |
| Password protection | Password protection against undesired adjustment of parameters | |
| Languages | English, Spanish, German, French, Italian, Portuguese | |
| Date and time settings | dd|mm| yy, mm|dd| yy, 12 h- or 24 h-format | |
| Saving mode | Integrated clock timer to switch on and turn off the analyzer Programmable sleeping mode after a longer period of non-use | |
| Display | Illuminated VGA-display | |
| Parameter and data input | Sealed membrane witht audible tactile feedback | |
| Real-time curves | Real-time curves of the loss in weight (% or gram) as well of the temperature pattern during and after the measurement | |
| Acoustical signals | Key stroke, ideal weight met and end of test, selectable on or off | |
| System status indicator lights | Two tri-color LEDs (balance & heater) on front of heater module | |
| Data input|output | Serial and Ethernet | |
| Printout of the protocol | Internal thermal printer, 40 character graphic | |
| Printout format | Configurable printout: selectable header (3 lines), analyzer info, operator, Sample ID, calibration info, program name, program parameters, interval print, weight info, result and signature line | |
| Weighing system | Monolithic weighing system for high-precision results | |
| Balance spill protection | Reservoir under draft shield to collect liquids, powders or pellets | |
| Operating conditions | 15–40°C (59–104°F) | 10–85% rel. humidity, no condensation | |
| Power requirements | 90-250 VAC 50|60 Hz self-adjusting power supply | |
| Housing dimensions (W+D+H) | 41.3 x 49.5 x23.5 cm (164 x 191 x 94 in) modules combined | |
| Weight | 10 kg (22 lbs.) modules combined | |
| Warranty | 2 years | |