Dillon AWT05-100370 Quick Check-T Tension Meter, with BT 10000 X 10 lbf

Features

Quick Check-T CELL TOWER SHUNT METER
No whiteboards!
No changing sheaves!
No manual site form completion!
The Dillon Quick Check-T tension meter makes a difference. It reduces time on the job site by eliminating the need for whiteboards, changing sheaves, and the need for charts to figure out target tensions. This unit also reduces time off of the job site by having automatic site form completion, with image, and direct complete reports.

• Bluetooth® enabled
• Custom mobile app
• Multi-wire single sheave
• Calibration check rod
• Automatic report generation with photos
• Automatic target tension calculations
• Ability to capture pre and post tension readings
• Inbuilt image capture

Why The Dillon Quick Check Makes the Difference

• Reduces time on site
  • No changing sheaves! – One sheave, two positions - just rotate
  • No charts to figure out target tensions!
  • No need for whiteboards! - – All info is on the display and on the app
• Reduces time off site
  • Automatic site form completion with images
  • Send completed reports directly from the app
Key Features:
• Bluetooth® enabled
• Custom mobile app
• Multi-wire single sheave
• Calibration check rod
• Automatic report generation with photos
• Automatic target tension calculations
• Ability to capture pre and post tension readings
• Inbuilt image capture
NEW Carrying Case
• IP67 waterproof
• Load bearing up to 140 lbs
• Cold resistant -40° F
• 50,000 uses catch lifespan
• Pressure balance valve

Specifications

Includes the Following Calibrations

Wire Size	Galvanized/Steel Wire Construction	Sheave
3/16"	1 x 7	3/16" - 1/2" (P)
1/4"	1 x 7	3/16" - 1/2" (P)
5/16"	1 x 7	3/16" - 1/2" (P)
3/8"	1 x 7	3/16" - 1/2" (P)
7/16"	1 x 7	3/16" - 1/2" (P)
1/2"	1 x 7	3/16" - 1/2" (P)
9/16"	1 x 7	3/16" - 1/2" (P)
5/8"	1 x 7	3/16" - 1/2" (P)
1/2"	1 x 19	1/2" - 1" (T)
9/16"	1 x 19	1/2" - 1" (T)
5/8"	1 x 19	1/2" - 1" (T)
11/16"	1 x 19	1/2" - 1" (T)
3/4"	1 x 19	1/2" - 1" (T)
13/16"	1 x 19	1/2" - 1" (T)
7/8"	1 x 19	1/2" - 1" (T)
1"	1 x 19	1/2" - 1" (T)

Model	AWT05-100370
Capacity x Readability	10000 x 10 lb 45 x 0.05 kN 4500 x 5 kg
Range	Wire sizes from 3/16" (4.75 mm) up to 1.0" (25.4 mm)
Communications	Bluetooth®
Wire Calibrations	Up to 20 wire calibrations
Units of Measure	lbf, kgf, newtons
Capture Rate	10Hz, 100Hz and 1000Hz
Resolution	Low / Medium / High (5000 resolutions)
Accuracy	+ 3% instrument capacity
Data Export	Via mobile app
Battery	Two C batteries
Operating Range	-4° F to 158° F (-20° C to 70° C)
Display	Dot-graphic LCD display supports full text
Calibration	Each wire rope calibration is traceable to the National Institute of Standards and Technology. Certificate included with curve readings. Passes only with three consecutive confirming runs, with all points in specification.
Protection	Hard polymer storage case included
Environmental	Suitable for continued outdoor use
Size	10 x 23 x 3” (25 x 59 x 8 cm)
Weight	11 lb (5 kg)
Recalibration	Every 12 months
Approved By	Majority of cell tower owners
Unit Dimension inch (mm)	9 x 24 x 3 (220 x 610 x 90)
Shipping Weight lb (kg)	27 (5)
Shipping Dimension inch (mm)	28 x 16 x 8 (710 x 410 x 200)

More Dillon

Accessories for the Dillon AWT05-100370 Quick Check-T Tension Meter, with BT 10000 X 10 lbf