Features
Communicator II
The Communicator II can remotely view and control one or several EDXtreme instruments simultaneously via radio frequency. If the EDXtreme is not equipped with radio, then a RS-485 cable will be required between the EDXtreme and Communicator II. Information is easily sent to computer from a radio Communicator II via a serial cable.
Specifications
| Model |
AWT05-506447 |
| Enclosure |
Designed to NEMA 3 / IP54 with optional sleeve. Suitable for protected outdoor use. |
| Instrument Size |
9.5 x 5.0 x 2.5 inch (241 x 127 x 64mm). |
| Accuracy |
Accuracy: Not applicable. Only sends and receives digital information. |
| Display |
128 x 64 dot-graphic LCD display can show full readings up to 5 instruments. |
| Battery Life |
Up to 80 hours continuous radio using (4) AA alkaline batteries. |
| Operating Temperature |
-4° F to 158° F (-20° to 70° C) |
| Connectors |
Sealed connectors may be used for serial communications and wired connection to an EDxtreme dynamometer. |
| RS-232 Communication |
Print or extract data easily. Continuous output can drive a scoreboard. Configurable poll character. |
| Included with Remote |
Carry case and batteries |
| Accessories |
Rubberized case protector sleeve. Remote wall mount bracket. Serial and remote cable assemblies |
| Approval |
CE |
Alarm Settings:
- DISABLED: Alarm feature will be turned off.
- ENABLED: Alarm will sound when activated value has been reached and will not sound when below deactivate value.
NOTE: Alarm will sound between the activate and deactivate values or both can be set at the same.
- INVERTED: Alarm will sound continuously until the activated value has been reached and will sound when below the deactivate value.
NOTE: Alarm will sound outside of the activate and deactivate values.
- BAND: Alarm will sound when activated value has been reached and will not sound when below deactivate value.
NOTE: Alarm will sound when between the activate and deactivate values.
- INVERT/BAND: Alarm will sound continuously until the activated value has been reached.
NOTE: Alarm will sound outside of the activate and deactivate values.
Radio Specifications
| FCC Certified |
For unlicensed low power devices. No radio licensing or permits required for normal operation.* (In the US and Canada. Check local ordinances in other countries.) |
| Frequency |
ISM 2.4 GHz frequency band operates between 2.4 to 2.4835 GHz. |
| Output Level |
10 mW (10 dBm) |
| Display Update Rate |
1 time per second. |
| Number of Links Remote Can Control |
Up to 15 addresses. |
| Configuration Address |
Automatic and configurable |
| Antenna |
Integral antenna. |
| Range |
Open-air range up to 600 feet, line-of-sight. Indoor range dependent upon environment with 300 feet common. Low power radio systems are dependent upon interference levels from other radio systems and environmental conditions. Radio devices are not suitable for all applications. |
